HealthRider H70e Elliptical English Manual - Page 7
Attach the other Cover A 26 and Cover B
View all HealthRider H70e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Slide a Weld Spacer (28) onto the axle on the left side of the Upright (2). Make sure that the open side of the Weld Spacer is facing the Upright. Apply a small amount of the included grease to the axle and to a 5/8" Wave Washer (31). Slide an Upper Body Arm (29) onto the axle on the left side of the Upright (2). Then, slide the 5/8" Wave Washer onto the axle on the left side of the Upright. Attach the Upper Body Arm (29) with an M8 x 20mm Patch Screw (86) and a 5/16" Washer (68). Make sure that the 5/8" Wave Washer (31) is on the axle. Attach the other Upper Body Arm (29) to the right side of the Upright (2) in the same way. 4. Look inside a Cover A (26) and a Cover B (66) set and locate the square tabs connecting the two halves. Gently lift the tabs and disconnect the halves. Hold the Cover A (26) and the Cover B (66) around the tube on the left side of the Upright (2). Align the halves and press them together until they lock. Attach the other Cover A (26) and Cover B (66) set to the right side of the Upright (2) in the same way. 3 2 29 Grease 28 31 29 68 Axle 86 Grease 4 66 2 26 26 66 7