HealthRider Hotel Fitness Rb9800-e Bike English Manual - Page 6

1. To make assembly easier, read the 1 information on page 5 before you begin. Orient the Rear Stabilizer (3) as shown. Insert a Stabilizer Plate (89) into the Rear Stabilizer. Insert the Rear Stabilizer (3) into the Frame (1). Tighten the four Stabilizer Set Screws (9) located in the Rear Stabilizer. Then, attach the Rear Stabilizer with four 3/8" x 3/4" Button Screws (65) and four M10 Flat Washers (80). Tighten two Leveling Feet (47) into the underside of the Rear Stabilizer (3). 89 3 9 47 47 1 80 9 80 65 65 2. While a second person holds the Seat Frame (8) near the Seat Carriage (7), connect the seat 2 pulse wire (A) to the carriage pulse wire (B). Tip: Avoid pinching the wires. Attach the Seat Frame (8) to the Seat Carriage (7) with six M10 x 12mm Button Screws (77). Avoid pinching the wires 8 A B 7 77 77 6