HealthRider Hotel Fitness Rb9800-e Bike English Manual - Page 7

3. Orient the Upright Cover (20) as shown, and slide it upward onto the Upright (4). Have a second person hold the Upright (4) near the Frame (1). See the inset drawing. Locate the wire tie in the Upright (4). Tie the lower end of the wire tie to the frame wires (C). Next, pull the upper end of the wire tie upward out of the top of the Upright. Tip: To prevent the frame wires from falling into the Upright, secure the frame wires with the wire tie. Tip: Avoid pinching the wires. Slide the Upright (4) onto the Frame (1). Attach the Upright with four M8 x 20mm Flat Head Screws (56). Then, slide the Upright Cover (20) downward to the bottom of the Upright (4). 3 Wire Tie 56 Avoid pinching the wires 20 Wire Tie C C 4 56 1 4. Untie and discard the wire tie on the frame wires (C). 4 While a second person holds the console assembly near the Upright (4), connect the wires on the console assembly to the frame wires (C). Note: Some of the wires are for the optional Workout TV (see page 10). Tip: Avoid pinching the wires. Attach the console assembly to the Upright (4) with four M8 x 20mm Screws (57). Console Assembly C 57 4 Avoid pinching the wires 5. Make sure that all parts of the exercise bike are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the exercise bike. 7