HP 1000-1200 Maintenance and Service Guide 1 - Page 43
until the memory module tilts up at a 45° angle, and then, Spread the two retention clips outward
View all HP 1000-1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Table 5-3 Memory module descriptions and part numbers Description 16 GB, DDR4-4800 8 GB, DDR4-4800 Memory module cover Spare part number M97596-005 M97595-005 N13393-001 Before removing the memory, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 33). 2. Remove the bottom cover (see Bottom cover on page 33). 3. Remove the battery (see Battery on page 34). If you are replacing a memory module, remove the existing memory module: 1. Use a nonmarking, nonconductive tool to release the edges of the bottom cover from the system board (1), and then remove the memory module cover (2). 2. Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle, and then remove the module (2). Use the same procedure to remove all memory modules. IMPORTANT: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. 36 Chapter 5 Removal and replacement procedures for authorized service provider parts