HP 10636 HP 10000 G2 Series Rack Options Installation Guide - Page 49
Ground Bonding kit, About this device, Kit contents, Required tools
![]() |
View all HP 10636 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Ground Bonding kit About this device The HP Ground Bonding kit reduces the electromagnetic emissions outside the rack. These emissions are produced during normal operation of the electronic components within the rack. Typically, rack-mounted equipment must meet class A emissions levels, but you might want to reduce these levels even further. Use this kit to tie all the conductive structural components together with conductive cables, and then attach the kit to a ground bonding point on the AC power distribution device of the rack or the building ground. Kit contents Item Quantity 15.24-cm (6-in) grounding straps 6 15.24-cm (6-in) grounding straps 6 (with a connector on one end) 36.83-cm (14.5-in) grounding straps 8 36.83-cm (14.5-in) grounding straps 6 (with a connector on one end) M8 internal serrated lock washer 20 M8 hex nut 20 M5.5 T-25 Torx screw 12 M6 x 10-mm Torx screw 1 M8 x 20-mm bolt 1 M8 Belleville toothed washer 1 M5 Belleville toothed washer 1 This kit might contain extra hardware for your convenience. Required tools The following tools are required for installation: • T-25 Torx driver • M8 socket Installing the ground bonding rack option kit on HP 10000 G2 Series Racks Attach the appropriate grounding straps to the following locations: From the system chassis to the front door (without a grounding lug): 1. Remove the rack front door. Ground Bonding kit 49
![](/manual_guide/products/hewlettpackard-10636-hp-10000-g2-series-rack-options-installation-guide-d108d9f/49.png)