HP 10636 HP 10000 G2 Series Rack Options Installation Guide - Page 66
Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the egress slot
View all HP 10636 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
3. Place the other end of the same grounding strap over the grounding lug on the egress slot. 4. Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the egress slot and tighten. From the rack to a building facility, contact your building supervisor for more information. The following figure illustrates parts for this step. Reference 1 2 3 4 5 Item 48.26-cm (19-in) mounting rail (the mounting hole is located at the top or bottom of the rail) M8 hex nut M8 Belleville toothed washer Facility ground (not included with this kit) M8 x 20 bolt Ground Bonding kit 66
Ground Bonding kit 66
3.
Place the other end of the same grounding strap over the grounding lug on the egress slot.
4.
Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the egress slot
and tighten.
From the rack to a building facility
, contact your building supervisor for more information. The following
figure illustrates parts for this step.
Reference
Item
1
48.26-cm (19-in) mounting rail (the mounting hole is
located at the top or bottom of the rail)
2
M8 hex nut
3
M8 Belleville toothed washer
4
Facility ground (not included with this kit)
5
M8 x 20 bolt