HP 1155 Maintenance & Service Guide HP 1155 All-in-One Business PC - Page 64
Optical Drive Cables and Connector, Preparing to Disassemble the Computer, on Rear Cover
View all HP 1155 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Optical Drive Cables and Connector Description Optical drive connector cable Spare part number 669998-001 The optical drive connector is secured with two screws and has two cables that connect to the system board. To remove the optical drive connector: 1. Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 37). 2. Remove the rear cover (see Rear Cover on page 38). 3. Remove the optical drive (see Optical Drive on page 55). 4. Remove two screws that secure the optical drive connector (1) to the computer. 5. Disconnect the optical drive power and data cables (2) from the system board. NOTE: Be careful not to damage the cable when disconnecting it from the board. Do not pull on the wires. Optical Drive Cables and Connector 57