HP 1155 Maintenance & Service Guide HP 1155 All-in-One Business PC - Page 68

Hard Drive Cables and Connector

Get HP 1155 PDF manuals and user guides View all HP 1155 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

NOTE: Make sure the grommets are not broken or missing before installing the hard drive. Replacement grommets are available using spare part number 669991-001. Hard Drive Cables and Connector Description Hard drive connector cable Spare part number 669997-001 The hard drive connector is secured with two screws and has two cables that connect to the system board. To remove the hard drive connector: 1. Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 37). 2. Remove the rear cover (see Rear Cover on page 38). 3. Remove the hard drive (see Hard Drive on page 59). 4. Disconnect the hard drive power and data cables (1) from the system board. NOTE: Be careful not to damage the cable when disconnecting it from the board. Do not pull on the wires. 5. Remove two screws that secure the hard drive connector (2) to the computer. 6. Remove the cables from the metal clips built into the computer. Hard Drive Cables and Connector 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
NOTE:
Make sure the grommets are not broken or missing before installing the hard drive.
Replacement grommets are available using spare part number 669991-001.
Hard Drive Cables and Connector
Description
Spare part number
Hard drive connector cable
669997-001
The hard drive connector is secured with two screws and has two cables that connect to the system
board.
To remove the hard drive connector:
1.
Prepare the computer for disassembly (see
Preparing to Disassemble the Computer
on page
37
).
2.
Remove the rear cover (see
Rear Cover
on page
38
).
3.
Remove the hard drive (see
Hard Drive
on page
59
).
4.
Disconnect the hard drive power and data cables
(1)
from the system board.
NOTE:
Be careful not to damage the cable when disconnecting it from the board. Do not pull
on the wires.
5.
Remove two screws that secure the hard drive connector
(2)
to the computer.
6.
Remove the cables from the metal clips built into the computer.
Hard Drive Cables and Connector
61