HP 1230 HP Fax 1230 series - (English) Reference Guide - Page 58
copy problems, Verify that you have selected the proper paper size for your project.
View all HP 1230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
troubleshooting help copy problems problem solution Nothing happens • Make sure the HP Fax is turned on. If the front-panel display is blank, the when I try to copy. HP Fax is turned off. Make sure the HP Fax is connected to a power outlet. For information on turning on and connecting your HP Fax to a power outlet, see the Setup Poster. • Make sure your original is fully inserted into the automatic document feeder (ADF). When you place your original into the ADF, Original Loaded displays on the front panel. If this message does not appear, remove your original and re-insert it. For information, see load originals on page 5. • When you are copying several pages or documents, you must wait until the HP Fax completes the current copy job before starting a new copy job. • The HP Fax may be busy receiving a fax. Review the front-panel display for any status messages. • Check to see that you loaded the correct paper type in the input tray. For information, see recommended papers on page 7 and recommended paper-type settings for copying on page 9. Caution! Do not use the HP Fax to copy onto envelopes. • Check to see if there is a paper jam. For more information on clearing a paper jam, see avoid jams on page 10 and paper jams on page 45. Parts my original • Verify that you are copying onto the same size paper as the original. This do not appear or problem is most common when trying to copy a legal-size paper onto are cut off. letter-size paper. • Verify that you have selected the proper paper size for your project. For information on setting the paper size, see set the paper size on page 10. • Make sure that you have correctly loaded the paper in the input tray and that the input tray is properly installed. For information, see load paper on page 6. • Make sure the document guides are adjusted properly. The guides should be close to the edges of the paper in the input tray, but must not bend the paper. For information on loading originals, see load originals on page 5. • If you are copying from an original with no margins, reduce the copy to make sure the text or images are not cropped. For information, see reduce or enlarge a copy on page 35. Copies are too Adjust the contrast of the copy. For information, see make copies lighter or dark or too light. darker on page 34. 52 hp fax 1230