HP 14-w000 14 Notebook PC Maintenance and Service Guide - Page 38
Memory module, Note the location of the memory module
View all HP 14-w000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Memory module Description 4 GB memory module (PC3, 12800, 1600 MHz) 2 GB memory module (PC3, 12800, 1600 MHz) Spare part number 691740-001 691739-001 NOTE: Before adding memory modules, make sure the computer has the most recent BIOS version, and update the BIOS if needed. Before removing a memory module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 25). 5. Remove the service door (see Service door on page 26). Remove the memory module: NOTE: Note the location of the memory module (1) you are removing. If you are replacing it, install the new memory module in the same slot. 1. Spread the two retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) 28 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts