HP 14-w000 14 Notebook PC Maintenance and Service Guide - Page 56
Remove the bracket, Reverse this procedure to reassemble and install the hard drive.
View all HP 14-w000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
3. Disconnect the hard drive connector cable from the hard drive, and then remove the hard drive. 4. If it is necessary to disassemble the hard drive, perform the following steps: a. Remove the four Phillips M3.0×3.5 screws (1) from the bracket. b. Remove the bracket (2) from the hard drive. Reverse this procedure to reassemble and install the hard drive. 46 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
3.
Disconnect the hard drive connector cable from the hard drive, and then remove the hard drive.
4.
If it is necessary to disassemble the hard drive, perform the following steps:
a.
Remove the four Phillips M3.0×3.5 screws
(1)
from the bracket.
b.
Remove the bracket
(2)
from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
46
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts