HP 14-y000 14 Notebook PC Maintenance and Service Guide - Page 42
Optical drive, out from the front until the optical drive is completely removed
View all HP 14-y000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Optical drive Description DVD+/-RW DL SuperMulti Drive (includes bezel, bracket, and screws)) Spare part number 785286-001 Before removing the optical drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 25). Remove the optical drive: 1. Using a small Phillips screwdriver, remove the Phillips M2.5×6.5 screw that secures the optical drive to the computer (1). 2. Using the screwdriver, push on the rear of the optical drive to disconnect it from the computer 3. If necessary, use a straightened paperclip and press gently in the release hole (2) until the disc tray releases. Pull the tray (3) out from the front until the optical drive is completely removed from the computer. If it is necessary to replace the optical drive bracket and bezel, position the optical drive with the rear panel toward you. 1. Remove the two Phillips screws from the optical drive (1) and remove the bracket (2). 32 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts