HP 14-y000 14 Notebook PC Maintenance and Service Guide - Page 57
Power button board, Remove the Phillips PM2.5×2.5 screw
View all HP 14-y000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Power button board Description Power button board (includes cable) Spare part number 785287-001 Before removing the power button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 25), and then remove the following components: a. Service door (see Service door on page 26) b. Memory module (see Memory module on page 28) c. WLAN module (see WLAN module on page 30) d. Optical drive (see Optical drive on page 32) e. Keyboard (see Keyboard on page 34) f. Top cover (see Top cover on page 41) Remove the power button board: 1. Position the top cover upside down with the front toward you. 2. Remove the Phillips PM2.5×2.5 screw (1) that secures the power button board to the top cover. Component replacement procedures 47