HP 14-y000 14 Notebook PC Maintenance and Service Guide - Page 63
Remove the Phillips PM2.5×6.5 screw, until it rests at an angle.
View all HP 14-y000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
2. Remove the Phillips PM2.5×6.5 screw (1) that secures the power connector bracket to the base enclosure. Remove the power connector bracket (2). 3. Remove the two Phillips M2.5×5.0 screws (1) that secure the system board to the base enclosure. 4. Lift the right side of the system board (2) until it rests at an angle. Component replacement procedures 53
2.
Remove the Phillips PM2.5×6.5 screw
(1)
that secures the power connector bracket to
the base enclosure. Remove the power connector bracket
(2)
.
3.
Remove the two Phillips M2.5×5.0 screws
(1)
that secure the system board to the base enclosure.
4.
Lift the right side of the system board
(2)
until it rests at an angle.
Component replacement procedures
53