HP 260 Maintenance and Service Guide - Page 32
A memory module can be installed in only one way. Match the notch on the module with the tab
View all HP 260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
4. To remove a SODIMM, press outward on the two latches on each side of the SODIMM (1) then pull the SODIMM out of the socket (2). 5. Slide the new SODIMM into the socket at approximately a 30° angle (1) then press the SODIMM down (2) so that the latches lock it in place. NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. 24 Chapter 4 Removal and replacement procedures
4.
To remove a SODIMM, press outward on the two latches on each side of the SODIMM (1) then pull the
SODIMM out of the socket (2).
5.
Slide the new SODIMM into the socket at approximately a 30° angle (1) then press the SODIMM down (2)
so that the latches lock it in place.
NOTE:
A memory module can be installed in only one way. Match the notch on the module with the tab
on the memory socket.
24
Chapter 4
Removal and replacement procedures