HP 260 Maintenance and Service Guide - Page 36
Speaker
View all HP 260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Speaker A single speaker is located behind the front bezel. It is secured by bottom clips that fit into slots in the system board. A WLAN antenna transceiver mounts to the front of the speaker assembly. To remove the speaker: 1. Prepare the computer for disassembly (Preparation for disassembly on page 17). 2. Remove the access panel (Access panel on page 18). 3. From the inside of the computer, disconnect the speaker cable from the system board connector (1). 4. Disconnect the WLAN antenna cable that is secured to the speaker from the WLAN module connector (2). The antenna that is secured to the speaker routes to the connector labeled '1' on the WLAN module. 28 Chapter 4 Removal and replacement procedures
Speaker
A single speaker is located behind the front bezel. It is secured by bottom clips that fit into slots in the system
board. A WLAN antenna transceiver mounts to the front of the speaker assembly.
To remove the speaker:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
17
).
2.
Remove the access panel (
Access panel
on page
18
).
3.
From the inside of the computer, disconnect the speaker cable from the system board connector
(1)
.
4.
Disconnect the WLAN antenna cable that is secured to the speaker from the WLAN module connector
(2)
. The antenna that is secured to the speaker routes to the connector labeled ‘1’ on the WLAN module.
28
Chapter 4
Removal and replacement procedures