HP 2605dn HP Color LaserJet 2605/2605dn/2605dtn - User Guide - Page 158
Table 12-2, 3 Fuser Error - fuser removal
View all HP 2605dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Table 12-2 Critical error messages (continued) Control panel message Description Recommended action If you have recently installed a memory DIMM in the printer, turn off the printer, remove the memory DIMM, reinstall the DIMM to verify that it is seated properly, and then turn on the printer. If a surge protector is being used, remove it. Plug the printer directly into the wall socket. Use the power switch to turn the printer on. If the error persists, contact HP Customer Care. See HP Customer Care or the support flyer that came in the printer box. 50 Fuser Error Turn off then on The printer has experienced an internal hardware error. Turn off the printer, wait at least 25 minutes, and then turn on the printer. 50.1 Fuser Error - Low fuser error 50.2 Fuser Error - Slow fuser error 50.3 Fuser Error - High fuser error 50.7 Fuser Error - Fuser open error 50.8 Fuser Error - Low subthermistor fuser error If a surge protector is being used, remove it. Plug the printer directly into the wall socket. Use the power switch to turn on the printer. If the error persists, contact HP Customer Care. See HP Customer Care or the support flyer that came in the printer box. 50.9 Fuser Error - High subthermistor fuser error 51 Laser Error Turn off then on The printer has experienced an internal hardware error. 51.20 Error - Black laser scanner error Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize. 51.21 Error - Cyan laser scanner error 51.22 Error - Magenta laser scanner error 51.23 Error - Yellow laser scanner error If a surge protector is being used, remove it. Plug the printer directly into the wall socket. Use the power switch to turn the printer on. If the error persists, contact HP Customer Care. See HP Customer Care or the support flyer that came in the printer box. 54 Error Turn off then on The printer has experienced a toner level sensor error. 54.15 Error - Yellow Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize. 54.16 Error - Magenta 54.17 Error - Cyan 54.18 Error - Black 54.1C Error - Density sensory contamination warning If a surge protector is being used, remove it. Plug the printer directly into the wall socket. Use the power switch to turn the printer on. If the error persists, contact HP Customer Care. See HP Customer Care or the support flyer that came in the printer box. 55.0601 Error 55.0602 Error The printer has experienced an internal hardware error. Turn off the power by using the power switch, wait at least 30 seconds, and then 146 Chapter 12 Problem solving ENWW