Home » HP Manuals » Laser Printers » HP 2605dn » Manual Viewer

HP 2605dn HP Color LaserJet 2605/2605dn/2605dtn - User Guide - Page 159

Error, Turn off then on, Duplexer Error, Sensor error - 79 error

Add to My Manuals
Save this manual to your list of manuals

Page 159 highlights

Table 12-2 Critical error messages (continued) Control panel message Description Recommended action 55.1 Error 59.A0 Error 59.9 Error 54.1C Error turn on the power and wait for the printer to initialize. If a surge protector is being used, remove it. Plug the printer directly into the wall socket. Use the power switch to turn the printer on. If the error persists, contact HP Customer Care. See HP Customer Care or the support flyer that came in the printer box. 57 Fan Error Turn off then on The printer has experienced a problem with its internal fan. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize. If the error persists, contact HP Customer Care. See HP Customer Care or the support flyer that came in the printer box. 79 Error Turn off then on The printer has experienced an internal firmware error. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize. If you have recently installed a memory DIMM in the printer, turn off the printer, remove the memory DIMM, reinstall the DIMM to verify that it is seated properly, and then turn on the printer. If a surge protector is being used, remove it. Plug the printer directly into the wall socket. Use the power switch to turn the printer on. If the error persists, contact HP Customer Care. See HP Customer Care or the support flyer that came in the printer box. Duplexer Error Turn off then on The duplexer is not connected or installed correctly. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize. If a surge protector is being used, remove it. Plug the printer directly into the wall socket. Use the power switch to turn the printer on. If the error persists, contact HP Customer Care. See HP Customer Care or the support flyer that came in the printer box. Sensor error Turn off then on A sensor error has occurred. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize. If the error persists, contact HP Customer Care. See HP Customer Care or the support flyer that came in the printer box. ENWW Control panel messages 147

Section	Page
Printer basics	13
Quick access to printer information	14
Printer configurations	15
HP Color LaserJet 2605 printer	15
HP Color LaserJet 2605dn printer	15
HP Color LaserJet 2605dtn printer	16
Printer features	17
Walk around	19
Software	21
Software and supported operating systems	21
Software tips	21
How do I gain access to the printer features?	21
How do I get the latest printing software?	22
What other software is available?	22
Print-media specifications	23
General guidelines	23
Paper and print media	23
Printing and storage environment	24
Envelopes	24
Labels	26
Transparencies	27
HP LaserJet glossy paper and HP LaserJet Photo paper	27
Letterhead or preprinted forms	27
HP LaserJet Tough paper	27
Custom-sized print media or cardstock	28
Supported media weights and sizes	28
Software for Windows	31
Printer drivers	32
Using Help	32
HP ToolboxFX	33
Embedded Web server (EWS)	34
HP Web Jetadmin	35
Uninstalling the printing software	36
Uninstalling software for Windows	36
Uninstalling software for Windows by using Add or Remove Programs	36
Software for Macintosh	37
Software for Macintosh computers	38
Installing Macintosh printing system software for networks	38
Installing Macintosh printing system software for direct connections (USB)	39
To remove software from Macintosh operating systems	39
Printer drivers for Macintosh computers	40
Supported printer drivers	40
Gaining access to the printer drivers	40
Using features in the Macintosh printer driver	41
Creating and using presets in Mac OS X	41
Printing a cover page	41
Printing multiple pages on one sheet of paper	42
Printing on both sides of the paper	42
Setting the color options	43
Enabling memory	44
Managing printer color options on Macintosh computers	45
Print Color as Gray	45
Advanced color options for text, graphics, and photographs	45
Halftone options	45
Neutral Grays	45
RGB Color	46
Edge Control	46
Using Macintosh Configure Device	47
Macintosh Configure Device (Mac OS X V10.3 and Mac OS X V10.4)	47
Troubleshooting common Macintosh problems	48
Solving problems with Mac OS X	48
Control panel	51
Control panel features	52
Display	52
Control panel menus	53
Using the control panel menus	53
Control panel menu map	53
Understanding Supplies Status	54
Black, Yellow, Cyan, and Magenta Supplies Status gauges	55
Understanding Printer Status	55
Cancel Job button	55
Attention light	55
Ready light	55
Left and Right arrow buttons	55
Printing tasks	57
Loading trays	58
Loading Tray 1	58
Loading Tray 2	59
Printing on special media	64
Controlling print jobs	65
Settings for selecting print media	65
Features in the printer driver	66
Setting a custom paper size	66
Printing in grayscale	66
Changing the color settings	66
Creating and using watermarks	66
Printing multiple pages on one sheet of paper (N-up printing)	67
Creating and using Quick Sets	67
Reducing or enlarging	67
Printing on different paper for the first page	67
Restoring the default printer-driver settings	68
To print from Windows	68
Gaining access to printer driver settings	68
Printing on both sides	70
Canceling a print job	72
Color	73
Using color	74
HP ImageREt 2400	74
Media selection	74
Color options	74
Standard red-green-blue (sRGB)	74
Managing color options	76
Print in Grayscale	76
Automatic versus Manual color adjustment	76
Change color options	76
Halftone options	77
Edge Control	77
RGB Color	77
Neutral Grays	78
Matching colors	79
Photo	81
Inserting a memory card	82
Changing memory card default settings	84
Changing memory card settings for the current job	85
Printing photos directly from the memory card	86
Printing a memory card index	87
Networking	89
Set up the printer and use it on the network	90
To configure a network port-connected printer configuration (direct mode or peer-to-peer printing)	90
To configure a direct-connected shared printer (client server printing)	91
To change from a direct-connected shared printer to a network port-connected printer configuration	91
Managing the network	92
Viewing network settings	92
Changing network settings	92
Set my network password	92
Using the printer control panel	93
Network configuration page	93
Configuration page	93
IP configuration	93
Configure a static IP address for my printer	93
Automatic configuration	94
Link speed and duplex settings	94
Supported network protocols	96
TCP/IP	98
Internet Protocol (IP)	98
Transmission Control Protocol (TCP)	98
User Datagram Protocol (UDP)	98
IP address	98
IP address: network portion	99
IP address: host portion	99
IP address structure and class	99
Configuring IP parameters	100
Dynamic Host Configuration Protocol (DHCP)	100
BOOTP	100
Subnets	100
Subnet mask	100
Gateways	101
Default gateway	101
TCP/IP configuration	101
Server-based, AutoIP, and manual TCP/IP configuration	101
Server-based TCP/IP configuration	102
Default IP address configuration (AutoIP)	102
TCP/IP configuration tools	102
Troubleshooting	103
Verifying that the printer is on and online	103
Resolving communication problems with the network	103
How do I?	105
Print: How do I?	106
Set the printer for high-quality output	106
Print on both sides of the paper	107
Select paper type for special media	109
Change the device print settings, such as print quality, in HP ToolboxFX	109
Print color documents from my computer in black and white only	110
Change color options	110
Halftone options	110
Edge Control	110
RGB Color	111
Neutral Grays	111
Network: How do I?	112
Set up the printer and use it on the network	112
Set my network password	112
Find my network IP address	112
Configure a static IP address for my printer	112
Add memory: How do I?	114
Installing memory and font DIMMs	114
Other: How do I?	117
Changing print cartridges	117
To change the print cartridge	117
Managing the printer	121
Device pages and reports	122
Demo page	122
Configuration page	122
Supplies Status page	123
Networking page	125
Fonts pages	125
Usage page	125
Menu map	126
HP ToolboxFX	127
To view HP ToolboxFX	127
Status	128
Event log	128
Alerts	129
Set up status alerts	129
Set up e-mail alerts	129
Help	129
Device settings	130
Device information	130
Paper handling	131
Printing	131
PCL5e	131
PostScript	132
Print quality	132
Print density	132
Paper types	133
Memory card (HP Color LaserJet 2605dtn)	133
System setup	134
Service	134
Network settings	134
Using the embedded Web server	135
To access the embedded Web server using a network connection	135
Information tab	136
Settings tab	136
Networking tab	137
Other links found in HP ToolboxFX	137
Maintenance	139
Managing supplies	140
Supplies life	140
Checking and ordering supplies	140
To check status and order using the control panel	140
To check and order supplies using HP ToolboxFX	140
To check and order using HP Web Jetadmin	141
Storing supplies	141
Replacing and recycling supplies	141
HP policy on non-HP supplies	141
Resetting the printer for non-HP supplies	141
HP anti-counterfeit website	142
Cleaning the printer	143
To remove toner build‑up	143
To clean the paper path using HP ToolboxFX	145
Cartridge out override	146
Configuration	146
On-going operation	146
Changing print cartridges	147
To change the print cartridge	147
Calibrating the printer	150
To calibrate the printer at the printer	150
To calibrate the printer from the HP ToolboxFX	150
Problem solving	151
Troubleshooting process	152
Troubleshooting checklist	152
Control panel messages	154
Alert and warning messages	154
Critical error messages	157
Clearing jams	160
Where to look for jams	160
To clear jams from inside the printer	161
To clear jams from the duplex area (HP Color LaserJet 2605dn and 2605dtn models only)	162
To clear jams from the top bin (HP Color LaserJet 2605)	164
To clear jams from the top output area (HP Color LaserJet 2605dn and 2605dtn models only)	165
To clear jams from Tray 2 or optional Tray 3	167
Print problems	168
Print quality problems	168
Identifying and correcting print defects	168
Print-quality checklist	168
General print quality issues	168
Solving issues with color documents	173
Media-handling problems	174
Print-media guidelines	174
Solving print-media problems	175
Performance problems	176
Troubleshooting tools	177
Device pages and reports	177
Demo page	177
Configuration page	177
Supplies Status page	177
HP ToolboxFX	177
To view HP ToolboxFX	177
Troubleshooting tab	177
Service menu	178
Restoring the factory-set defaults	178
Cleaning the paper path	178
Calibrating the printer	178
Working with memory	179
Printer memory	180
Installing memory and font DIMMs	181
Checking DIMM installation	184
Enabling memory	185
Enabling the language-font DIMM for Windows	186
Accessories and ordering information	187
Supplies	188
Memory	189
Cable and interface accessories	190
Paper handling accessories	191
Paper and other print media	192
User-replaceable parts	194
Supplementary Documentation	195
Service and support	197
Hewlett-Packard limited warranty statement	198
Print Cartridge Limited Warranty Statement	199
HP Customer Care	200
Availability of support and service	202
HP Care Pack™ Services and Service Agreements	202
Repacking the printer	203
To repack the printer	203
Service information form	204
Specifications	205
Printer specifications	206
Regulatory information	209
Introduction	210
FCC regulations	211
Environmental Product Stewardship program	212
Protecting the environment	212
Ozone production	212
Power consumption	212
HP LaserJet printing supplies	212
Disposal of waste equipment by users in private households in the European Union	213
Material safety data sheet	214
Declaration of conformity	215
Country/region-specific safety statements	216
Laser safety statement	216
Canadian DOC statement	216
Korean EMI statement	216
VCCI statement (Japan)	216
Finnish laser statement	217

Match case Limit results 1 per page

Control panel message

Description

Recommended action

55.1 Error

59.A0 Error

59.9 Error

54.1C Error

turn on the power and wait for the printer to

initialize.

If a surge protector is being used, remove

it. Plug the printer directly into the wall

socket. Use the power switch to turn the

printer on.

If the error persists, contact HP Customer

Care. See

HP Customer

Care

or the

support flyer that came in the printer box.

57 Fan Error

Turn off then on

The printer has experienced a problem with

its internal fan.

Turn off the power by using the power

switch, wait at least 30 seconds, and then

turn on the power and wait for the printer to

initialize.

If the error persists, contact HP Customer

Care. See

HP Customer

Care

or the

support flyer that came in the printer box.

79 Error

Turn off then on

The printer has experienced an internal

firmware error.

Turn off the power by using the power

switch, wait at least 30 seconds, and then

turn on the power and wait for the printer to

initialize.

If you have recently installed a memory

DIMM in the printer, turn off the printer,

remove the memory DIMM, reinstall the

DIMM to verify that it is seated properly,

and then turn on the printer.

If a surge protector is being used, remove

it. Plug the printer directly into the wall

socket. Use the power switch to turn the

printer on.

If the error persists, contact HP Customer

Care. See

HP Customer

Care

or the

support flyer that came in the printer box.

Duplexer Error

Turn off then on

The duplexer is not connected or installed

correctly.

Turn off the power by using the power

switch, wait at least 30 seconds, and then

turn on the power and wait for the printer to

initialize.

If a surge protector is being used, remove

it. Plug the printer directly into the wall

socket. Use the power switch to turn the

printer on.

If the error persists, contact HP Customer

Care. See

HP Customer

Care

or the

support flyer that came in the printer box.

Sensor error

Turn off then on

A sensor error has occurred.

Turn off the power by using the power

switch, wait at least 30 seconds, and then

turn on the power and wait for the printer to

initialize.

If the error persists, contact HP Customer

Care. See

HP Customer

Care

or the

support flyer that came in the printer box.

Table 12-2

Critical error messages (continued)

ENWW

Control panel messages

147