HP 4570C HP Scanjet 4500 and 5500 series scanners - (English) User Manual - Page 10
connect the TMA - scanjet power
UPC - 808736181358
View all HP 4570C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
connect the TMA If your scanner has a transparent materials adapter (TMA), it allows you to scan 35 mm slides or negatives. 1 Disconnect the power cable from the scanner. 2 On the back of the scanner, find the round TMA port: - On the HP Scanjet 4500c and 5550c series scanners, the TMA port is the second port from the left. - On the HP Scanjet 4570c and 5500c series scanners, the TMA port is the second port from the right. 3 Holding the TMA cable by its free end, align the connector so the arrow is on the top side. 4 Gently insert the connector into the TMA port. 5 Reconnect the power cable. TMA port 5 install the scanner
install the scanner
5
connect the TMA
If your scanner has a transparent materials adapter (TMA), it allows you to scan
35 mm slides or negatives.
1
Disconnect the power cable from the scanner.
2
On the back of the scanner, find the round TMA port:
–
On the HP Scanjet 4500c and 5550c series scanners, the TMA port is
the second port from the left.
–
On the HP Scanjet 4570c and 5500c series scanners, the TMA port is
the second port from the right.
3
Holding the TMA cable by its free end, align the connector so the arrow is
on the top side.
4
Gently insert the connector into the TMA port.
5
Reconnect the power cable.
TMA port