HP 5200dtn HP LaserJet 5200 Series Printer - Software Technical Reference (Ext - Page 282

NOTE These printer models support smart duplexing. The device uses the smart duplexing feature to detect information on both sides of the print job pages and runs the pages through the duplexing unit only if there is printable information on the second side of the page. The HP LaserJet 5200 printer supports smart duplexing. The device uses the smart duplexing feature to detect information on both sides of the print job pages and only runs the pages through the duplexing unit if printable information appears on the second side of the page. Allow Manual Duplexing Select Allow Manual Duplexing to print on both sides of any size and most types of media (except transparencies, envelopes, and labels). To use this feature, you must reinsert the media stack into the input tray to print the second side. The device pauses while you make this adjustment. This setting is enabled by default. Printer Memory This option matches the setting to the amount of memory that is installed in the device. The driver generates ranges of memory that can be selected, up to the maximum that the device can accept. The driver can use this information to manage how the print driver uses the device memory. Printer Hard Disk When this option is enabled, the Job Storage option and the Mopier Mode are enabled in the print driver. Use the Job Storage option to store print jobs and then print them later from the control panel. The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated copies from a single print job. NOTE A printer hard disk is not available for the HP LaserJet 5200 printer. Do not select the Installed setting. Job storage When Job Storage is enabled, the device can store print jobs so that you can gain access to those print jobs later at the control panel. Mopier Mode The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated copies from a single print job. Multiple-original printing (mopying) increases performance and reduces network traffic by transmitting the job to the device once, and then storing it in memory. The remainder of the copies are printed at the fastest speed. All documents that are printed in mopier mode can be created, controlled, managed, and finished from the computer, which eliminates the extra step of using a photocopier. The HP LaserJet 5200 supports the transmit-once mopying feature when the Mopier Mode: setting on the Device Settings tab is Enabled. When you use the HP PCL 6 Unidriver, HP PCL 5 Unidriver, or PS Emulation Unidriver, mopying is performed in one of two ways: either through the software or through the device hardware. When the mopier is enabled, mopying takes place through the device hardware by default. One copy of a multiplepage print job is transmitted once through the network to the device, together with a printer job language (PJL) command directing the device to make the specified number of copies. HP unidrivers for Windows 260 Chapter 5 HP PCL 6, PCL 5, and PS emulation unidrivers for MS Windows ENWW