HP 5200dtn HP LaserJet 5200 Series Printer - Software Technical Reference (Ext - Page 332
Macintosh, print print-ready documents
UPC - 882780124240
View all HP 5200dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 332 highlights
Macintosh Macintosh, print print-ready documents If the HP LaserJet 5200 uses a direct network connection, use file transfer protocol (FTP) to print a printready file. Complete the following steps: 1. Make note of the TCP/IP address on the Embedded Jetdirect page. The HP Embedded Jetdirect page is the second page of the configuration page printout. To print a configuration page, see Determining the current level of firmware . 2. Open a Terminal window on your Macintosh. You can find the Terminal program on the computer hard drive in the following folder: System/Applications/Utilities/Terminal 3. Type FTP . For example, if the TCP/IP address is 192.168.0.90, type the following: FTP 192.168.0.90 4. Press Enter on the keyboard. 5. When prompted for a user name and password, press Enter. 6. You can drag and drop the print-ready file into the Terminal folder (System/Applications/Utilities/ Terminal). Alternatively, you can type put , where is the location where the printready file was downloaded from the Web. For example, type the following: put /username/desktop/5200FW.PDF NOTE If the file name or path includes a space, you must enclose the file name or path in quotation marks. For example, type put "/user name/desktop/5200FW.PDF" To ensure that the entire path to the print-ready file is placed in the put command, type put and a space, and then click and drag the print-ready file onto the terminal window. The complete path to the file is automatically placed after the put command. 7. Press Enter to print the document. 310 Chapter 6 Macintosh ENWW