HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 168

Interface Access and System Information Interface Access: Console/Serial Link, Web, and Inbound Telnet The switch currently responds to a request from the remote telnet client to negotiate window size. However, some telnet clients do not request to nego­ tiate window size unless the switch's telnet server suggests that NAWS is available. This feature allows window size negotiation to occur with telnet clients that support NAWS but do not try to use it unless it is suggested by the switch's telnet server. The switch's telnet server will suggest to the telnet client that NAWS is available. Reconfigure Web Browser Access. In the default configuration, web browser access is enabled. Syntax: [no] web-management [listen ] Use the no version of the command to disable inbound HTTP access. The listen parameter is available only on switches that have a separate out-of-band management port. Values for this parameter are: • oobm - inbound HTTP access is enabled only on the out-of-band management port. • data - inbound HTTP access is enabled only on the data ports. • both - inbound HTTP access is enabled on both the out-of-band management port and on the data ports. This is the default value. Refer to Appendix G, "Network Out-of-Band Management" in this guide for more information on out-of-band management. The listen parameter is not available on switches that do not have a separate out-of-band management port. To disable web browser access: ProCurve(config)# no web-management To re-enable web browser access: ProCurve(config)# web-management Reconfigure the Console/Serial Link Settings. You can reconfigure one or more console parameters with one console command. 7-8