HP 6125XLG R2306-HP 6125XLG Blade Switch EVB Configuration Guide
HP 6125XLG Manual
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 6125XLG manual content summary:
- HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 1
HP 6125XLG Blade Switch EVB Configuration Guide Part number: 5998-3728 Software version: Release 2306 Document version: 6W100-20130912 - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 2
, or use of this material. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 3
address learning for an S-channel 7 Configuring a VSI 7 Creating a VSI 7 Configuring VSI filters 8 Activating a VSI 9 Displaying and maintaining EVB 9 EVB configuration example 9 Support and other resources 14 Contacting HP 14 Subscription service 14 Related information 14 Documents 14 - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 4
a common bridge port. It enables coordinated configuration and management of bridge services for VMs. Overview Data center virtualization includes network virtualization, storage virtualization, and server virtualization. Server virtualization uses specific virtualization software such as VMware - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 5
A VSI is associated with the EVB bridge port to implement VM traffic management and policy configuration. A VSI can be considered as a subinterface of an S-channel. • Reflective Relay (RR)-An operation mode in which a received frame on a port that supports this function can be forwarded out of the - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 6
Do not enable both EVB and VLAN mapping, or both EVB and TRILL on a port. Do not configure the qinq enable or qinq ethernet-type service-tag command on a port enabled with EVB, and vice versa. For more information about the two commands, see Layer 2-LAN Switching Command Reference. To enable EVB: 3 - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 7
nearest-nontpmr admin-status commands, see Layer 2-LAN Switching Command Reference. To configure LLDP: Step 1. Enter system view. Command system-view 2. Enable LLDP globally. lldp global enable 3. Enter Ethernet interface view. interface interface-type interface-number 4. Enable LLDP on the - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 8
Step 2. Specify a default VSI manager. Command Remarks evb default-manager { { ip ip-address | ipv6 ipv6-address | name name } [ port port-number ] | local-server } By default, no default VSI manager is specified. Configuring VDP negotiation parameters After a station sends a VDP request other - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 9
view. Command system-view interface interface-type interface-number 3. Create an S-channel. evb s-channel channel-id service-vlan svlan-id Remarks N/A N/A By default, only the automatically created default S-channel, with both SCID and SVID as 1, exists on a port with EVB enabled. Configuring - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 10
RR mode for the S-channel. Command system-view interface s-channel interface-number:channel-id evb reflective-relay Remarks N/A N/A By default, the RR mode is disabled for an S-channel. Configuring MAC address learning for an S-channel You can manually disable the MAC address learning function - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 11
view. 2. Enter S-channel interface view. 3. Create a VSI. Command system-view interface s-channel interface-number:channel-id evb vsi vsi-local-id { association | pre-association } Remarks N/A N/A By default, no VSI exists on an S-channel. Configuring VSI filters A VSI filter contains a set of - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 12
view. 3. Activate the VSI. 4. (Optional.) Configure a description for the VSI. Command system-view interface s-channel interface-number:channel-id.vsi-lo cal-id evb vsi active description text Remarks N/A N/A By default, no VSI is activated. The default description information is "interface name - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 13
/0/1] quit # Specify the IP address and port number for the default VSI manager on EVB bridge 1. [EVB_bridge1] evb default-manager ip 192.168.1.1 port 8080 Configure other EVB bridges in the same way. (Details not shown.) 2. Configure the EVB station: Configure the EVB station on the VMM. For - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 14
version is used in this section. Figure 4 VAN Connection Manager To configure the NMS, log in to IMC, click the Resource tab, and Figure 4), and perform the following steps: a. Add an EVB bridge (Edge Switch): Select Edge Switch from the navigation tree, click Add on the page that appears, select - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 15
Select Network from the navigation tree, click Add on the page that appears, enter For FTP for Name, 100 for VLAN ID, and 10 for Max. Connections, and click OK. The network name For FTP is displayed in the Network List page, as shown in Figure 6. Figure 6 Network List page c. Define the VSI type of - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 16
Figure 8 Connection List page 4. Verify the configuration: After VM 1 starts, the VAN Connection Manager service component of IMC deploys the VSI type VM1 VSI on EVB bridge 1. Only the R&D center can use the FTP service on VM 1. 13 - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 17
Acronyms. Websites • HP.com http://www.hp.com • HP Networking http://www.hp.com/go/networking • HP manuals http://www.hp.com/support/manuals • HP download drivers and software http://www.hp.com/support/downloads • HP software depot http://www.software.hp.com • HP Education http://www.hp.com/learn 14 - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 18
Command conventions Convention Boldface Italic [ ] { x | y | ... } [ x | y | ... ] { x | y | ... } * [ x | y | ... ] * & # Description Bold text represents commands bold text. For example, the New User window appears; click OK. Multi-level or damage to hardware or software. An alert that calls - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 19
wired-WLAN switch. Represents an access point. Represents a security product, such as a firewall, a UTM, or a load-balancing or security card that is installed in a device. Represents a security card, such as a firewall card, a load-balancing card, or a NetStream card. Port numbering in examples - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 20
, 9 B bridging EVB configuration, 1, 3, 9 EVB default VSI manager specification, 4 EVB LLDP configuration, 4 EVB S-channel configuration, 5 EVB S-channel interface, 6 EVB S-channel MAC address learning configuration, 7 EVB S-channel RR mode configuration, 6 EVB S-channel VSI configuration, 7 EVB VDP - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 21
EVB VSI filter, 8, 9 V VDP EVB negotiation parameters, 5 virtual EVB virtual station interface. See VSI Virtual Ethernet Bridge. Use VEB VSI configuration, 7 creation, 7 Discovery Configuration Protocol. See VDP EVB default VSI manager, 4 EVB virtual station interface, 2 filter activation, 9 filter
HP 6125XLG Blade Switch
EVB
Configuration Guide
Part number: 5998-3728
Software version: Release 2306
Document version: 6W100-20130912