HP 6125XLG R2306-HP 6125XLG Blade Switch EVB Configuration Guide - Page 14
Add an EVB bridge Edge Switch, VAN Connection Manager, Edge Switch List
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3. Configure the NMS: Use VAN Connection Manager of IMC on the NMS to configure network resources. The IMC VCM 5.2 (E0401L01) version is used in this section. Figure 4 VAN Connection Manager To configure the NMS, log in to IMC, click the Resource tab, and select VAN Connection Manager from the navigation tree (see Figure 4), and perform the following steps: a. Add an EVB bridge (Edge Switch): Select Edge Switch from the navigation tree, click Add on the page that appears, select the four devices in the IP address range of 192.168.1.11 through 192.168.1.14 from IP View, and click OK. EVB bridge 1, EVB bridge 2, EVB bridge 3, and EVB bridge 4 are displayed in the Edge Switch List page, as shown in Figure 5. Figure 5 Edge Switch List page b. Add an FTP network: 11