HP 8/40 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June - Page 220
ficonCupShow, bitname, Understanding Admin Domain Restrictions, Command Availability
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
2 ficonCupShow ficonCupShow Displays FICON-CUP parameters for a switch. Synopsis ficoncupshow fmsmode ficoncupshow modereg [bitname] ficoncupshow MIHPTO Description Use this command to display FICON-CUP (Control Unit Port) parameters for a switch. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details Operands This command has the following operands: fmsmode Display the FICON Management Server (FMS) mode for the switch. modereg Display the FICON-CUP mode register. If no operand is specified, all mode register bit settings are displayed. If a mode register bit name is specified, then only the value of that bit is displayed. A value of 1 indicates that a given mode register bit is set, and 0 indicates that it is not set. The following operand is optional: bitname Displays the specified mode register bit as either set (1) or not set (0). Valid values for bitname are: POSC Programmed offline state control UAM User alert mode ASM Active=saved mode DCAM Director clock alert mode ACP Alternate control prohibited HCP Host control prohibited MIHPTO Displays the FICON-CUP missing interrupt handler primary timeout (MIHPTO) value in seconds. Examples To display the FMS mode for the switch: switch:user> ficoncupshow fmsmode fmsmode for the switch: Enabled To display the mode register for the switch: switch:user> ficoncupshow modereg POSC UAM ASM DCAM ACP HCP 1 0 1 1 1 0 194 Fabric OS Command Reference 53-1000599-02