HP 8/40 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June - Page 84
cfgCreate, configuration name must begin with a letter followed by any number
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
2 cfgCreate cfgCreate Creates a zone configuration. Synopsis cfgcreate "cfgName", "member[ ;member...]" Description Use this command to create a new zone configuration. This command changes the Defined Configuration (see cfgShow). For the change to become effective, enable the configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. Notes When FCS policy is enabled, this command can be issued only from the primary FCS switch. Refer to the zoneCreate command for more information on name and member specifications. Operands The following operands are required: "cfgName" Specify a name for the zone configuration in quotation marks. A zone configuration name must begin with a letter followed by any number of letters, numbers, and underscores. Names are case-sensitive. For example, "Cfg_1" and "cfg_1" are different zone configurations. Blank spaces are ignored. "member" Specify a zone member or list of zone members to be added to the configuration. The list must be enclosed in quotation marks. Members must be separated by a semicolons. The zone configuration member list must have at least one member. Empty member lists are not allowed. Examples To create a configuration containing three zones: switch:admin> cfgcreate "USA_cfg", "Red_zone;Blue_zone;Green_zone" See Also cfgAdd, cfgClear, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow 58 Fabric OS Command Reference 53-1000599-02