HP 8/40 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June - Page 473
Enables or disables Insistent Domain Id IDID for the specified EX_Port.
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 473 highlights
portCfgEXPort 2 -i mode Enables or disables Insistent Domain Id (IDID) for the specified EX_Port. Specify 1 to enable IDID, specify 2 to disable IDID. This command must be issued from a McDATA edge switch attached to a single or dual FCR configuration. Examples To set the fabric ID of port 2/1 to 5 and the port ID format to core: switch:admin> portcfgexport 2/1 -f 5 -p 1 To configure port 2/0 to be an EX_Port and set the fabric ID to 4: switch:admin> portcfgexport 2/0 -a 1 -f 4 To disable fabric parameter negotiation on port 2/0 of an EX_Port: switch:admin> portcfgexport 2/0 -t 2 To enable IDID on port 2: switch:admin>portcfgexport 2 -i 1 To display the configuration on port 2: switch:admin> portcfgexport 2 Port 2 info Admin: enabled State: NOT OK Pid format: Not Applicable Operate mode: Open Edge Fabric ID: 70 Preferred Domain ID: 109 Insistent Domain ID Mode: enabled Front WWN: 50:00:51:e3:76:0e:4e:46 Fabric Parameters: Auto Negotiate R_A_TOV: Not Applicable E_D_TOV: Not Applicable Authentication Type: None DH Group: N/A Hash Algorithm: N/A Edge fabric's primary wwn: N/A Edge fabric's version stamp: N/A See Also portCfgVEXPort, portDisable, portEnable, portShow, portCfgDefault, fcrbCastConfig Fabric OS Command Reference 447 53-1000599-02