HP 8/40 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June - Page 281
haDump, Synopsis, Description, Healthy, Failed, Unknown, haSyncStop, Operands, Examples
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
haDump 2 haDump Displays High Availability status information. Synopsis hadump Description Use this command to display information about the status of the High Availability (HA) feature on a switch. This command displays the following information: • Local CP state (slot number and CP ID) • Remote CP state (slot number and CP ID) • Type of recovery (warm or cold) • High Availability (enabled or disabled) • Heartbeat (up or down) • Health of standby CP defined as follows: Healthy The standby CP is running and the background health diagnostic has not detected any errors. Failed The standby CP is running, but the background health diagnostic has discovered a problem with the blade. The logs should be checked to determine the appropriate repair action. Failover is disabled until the standby CP is repaired. Information about the failing device in the standby CP is displayed. Unknown The standby CP health state is unknown due because the standby CP does not exist, heartbeat is down, or Health Monitor detects a configuration file error. • HA synchronization status: HA State synchronized The system is currently fully synchronized. If a failover became necessary, it would be nondisruptive. HA State not in sync The system is unable to synchronize the two CPs because the standby CP is faulty, a haSyncStop command was issued, or a system error occurred. If a failover became necessary at this time, the standby CP would reboot, and the failover would be disruptive. • IP and Fibre Channel addresses configured for the switch. • Additional internal HA state information, subject to change. Operands none Examples To view information about the High Availability feature status: switch:admin> hadump Local CP (Slot 6, CP1): Active, Cold Recovered Remote CP (Slot 5, CP0): Standby, Healthy HA enabled, Heartbeat Up, HA State synchronized SWITCH Fabric OS Command Reference 255 53-1000599-02