HP AE370A Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April - Page 142

9 Monitoring performance using Web Tools 1. Blade Aggregate Throughput graph is not supported on the Brocade 7500 switch. 2. ALPA Error graph is not supported on the Brocade 7500, Brocade 7600, or on the Brocade 48000 director with an FC4-18i, FC4-16IP, or FC4-18, FC4-48 blade. The labeling of axes in the graphs depends on the switch type. • For the Brocade 48000 directors, slot numbers are displayed with expansion arrows next to them, as shown in Figure 52 on page 122. Click the arrows to expand and contract the list of ports per slot. • For the Brocade 200E, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, and 7500 switches, slot numbers are not identified. For the Switch Throughput Utilization graph, the X-axis depends on the switch type. • For Brocade 48000 director, the X-axis scales up to 102.4 Gbit/sec in multiples of 2. • For Brocade 200E, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, 7500, and 7600 switches, the X-axis scales up to 4.0 Gbit/sec in increments of 0.4 Gbps. Port throughput utilization is represented by a horizontal bar for each selected port, which gets longer or shorter depending on the percent utilization for that port at the last poll time. Thin short vertical intersecting bars give a historical perspective by representing the highest and lowest values reached for each selected port since the graph was opened. A third bar between them represents the average of all values polled (see Figure 52). Figure 52 shows how to access the list of Advanced Performance Monitoring graphs using Web Tools. This example displays the graphs available in the Performance Monitoring window for a Brocade 48000 director with the Advanced Performance Monitoring license installed. Note that the slot number is identified. FIGURE 52 Accessing performance graphs 122 Web Tools Administrator's Guide 53-1000606-01