HP AE370A Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April - Page 53

Managing blades 3 4. Click Apply. Setting a slot-level IP address 1. Open the Switch Administration window as described on page 29. 2. Click the Blade tab. 3. Click the Set IP address button. FIGURE 19 Set IP Address dialog box 4. Select a slot number from the drop-down list. 5. Enter the IP address, subnet mask, and Gateway IP address. 6. Select a type from the drop-down list. 7. Click Add to add the new entry to the table. When you click the Add button, the values remain in the fields. 8. To delete a configuration, select a row in the table and click the Delete button. NOTE Clicking the Add or Delete buttons update the table in the Set IP Address dialog box, but does not send values to the switch. 9. Click the Apply button to save the values currently shown in the table to the switch or click Cancel to close the dialog box without saving any of your changes. To update the switch with your changes, you must update the table using the Add and Delete buttons, and then click Apply. Viewing IP addresses If you want to view the IP addresses configured on the switch for the currently populated slots, use the Show IP Address button. Web Tools Administrator's Guide 33 53-1000606-01