HP AE370A Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April - Page 242

18 Configuring SNMP 6. Enter the Switch WWN, name, or domain ID. You can also use the Browse button to locate and select a switch. 7. In the Peer Secret and Confirm Peer Secret fields, enter the peer secret value. 8. In the Local Secret and Confirm Local Secret fields, enter the local secret value. 9. Click Add. 10. When you are done adding secret key pairs for switches, click Apply. Modifying a shared secret key pair You can edit and modify the secret key pairs by switch. 1. Open the Switch Administration window as described on page 29. 2. Click the Security Policies tab. 3. Click Authentication on the Security Policies menu. 4. Click the Shared Secret Keys subtab. 5. Select a secret key pair and click Edit. 6. Make the appropriate changes and click OK. Configuring SNMP This section describes how to manage the configuration of the SNMP agent in the switch. The configuration includes SNMPv1 and SNMPv3 configuration, accessControl, and systemGroup configuration parameters. NOTE This module is read-only if you do not own the switch. For more information, see the snmpConfig command in the Fabric OS Command Reference. Setting SNMP Trap Levels When you set trap levels for a Brocade 48000 configured with two logical switches, it is on a logical-switch basis. This means that for each logical switch, you must set trap levels individually. 1. Open the Switch Administration window as described on page 29. 2. Click the SNMP tab. 222 Web Tools Administrator's Guide 53-1000606-01