HP AE370A Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April - Page 52
Managing blades, Enabling or disabling a blade
UPC - 882780362611
View all HP AE370A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
3 Managing blades • The Clone Policy button lets you copy a policy. Use this feature when you want to create similar policies. After you create a clone, you can edit the policy to make the appropriate changes. • The Activate Policy button lets you make an existing policy active. • The Distribute Policy button lets you distribute a policy to various switches. • The Accepts Distribution check box lets you set the policy to accept or reject distributions. Managing blades Web Tools provides the ability to enable and disable blades, and to set slot-level IP addresses for blades. The procedure in this section applies only to the Brocade 48000 and Brocade DCX Director. Enabling or disabling a blade 1. Open the Switch Administration window as described on page 29. 2. Click the Blade tab. The Firmware Version columns display the firmware loaded onto each blade. A blade can have more than one firmware image loaded onto it. The Enable Blade column in the Blade tab pane indicates whether the blade is enabled. FIGURE 18 Blade tab 3. Select the Enable Blade check box for each blade you want to enable. Clear the check box to disable the blade. You cannot enable or disable the CP blades. 32 Web Tools Administrator's Guide 53-1000606-01