HP AM866A Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, July 2009 - Page 192
Specifies the tape pool volume label or alternately the tape pool ID. This is
UPC - 884420064602
View all HP AM866A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
2 cryptoCfg --enable -LUN Forces the LUN to become enabled for encryption from a disabled state. This command must be executed on the local switch that is hosting the LUN. No commit is required after executing this command. This command proceeds with a warning and prompts for confirmation. A LUN may become disabled for various reasons, such as a change in policy from encrypted to cleartext, a conflict between LUN policy and LUN, or a missing DEK in the key vault. Force-enabling a LUN while metadata exist on the LUN may result in a loss of data and should be exercised with caution. Refer to the Fabric OS Encryption Administrator's Guide for a description of conditions under which a LUN may be disabled and recommendations for re-enabling the LUN while minimizing the risk of data loss. The following operands are required when force-enabling a LUN: crypto_target_container_name Specifies the name of the CTC to which this LUN belongs. LUN_Num Specifies the number of the LUN to be enabled. Use --show -container for a list of LUN numbers associated with the specified CTC. initiator_PWWN Specifies the initiator port WWN for the specified LUN. --create -tapepool Creates a tape pool. A tape pool consists of a group of tape media that share the same encryption policies and data encryption keys (DEKs). A maximum of 4096 tape pools per encryption group are supported. You may add up to a maximum of 25 tape pools per commit operation. There is a delay of five seconds delay at each commit operation. Policy configuration at the tape pool level is optional; if left unspecified LUN-level tape policy parameters apply. This command is valid only on the group leader. The following operands are supported: -label pool_label | -num pool_num Specifies the tape pool volume label or alternately the tape pool ID. This is a user-defined identifier, which must be unique within the encryption group and should match the tape pool label or ID that is configured on the tape backup application. The tape pool label can consist of any combination of characters. When using white space, you must enclose the tape pool label in double quotation marks. The maximum size is 64 bytes. This operand is required. -encryption_format Optionally specifies the tape encryption format. Two encryption formats are supported for tape pools: native Data is encrypted or decrypted using the Brocade native encryption format (metadata format and algorithm). This is the default setting. DF_compatible Data is encrypted or decrypted using the NetApp DataFort encryption format (metadata format and algorithm). Use of this format requires a NetApp DataFort-compatible license on the encryption switch or on the chassis that houses the encryption blade. 162 Fabric OS Command Reference 53-1001337-01