HP AM866A Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, July 2009 - Page 610
Enable or disable Tape Pipelining., In the Fabric OS v6.3.0 release
UPC - 884420064602
View all HP AM866A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 610 highlights
2 portCfg To create an IP interface using IPv6 with a prefix: switch:admin> portcfg ipif 8/ge0 create 2000::800:3333:1234/64 1500 Operation Succeeded To delete an IP interface: switch:admin> portcfg ipif 4/ge0 delete 192.168.100.50 Operation Succeeded To create a static IP route with a metric of 2 using an IPv4 address: switch:admin> portcfg iproute ge0 create 172.16.0.0 255.255.0.0 192.168.255.25 2 Operation Succeeded To create a static IP route using IPv6: switch:admin> portcfg iproute 8/ge0 create 3000:4444:800::3456/64 1080::8:800:200C:1234 To delete a static IP route using an IPv4 address: switch:admin> portcfg iproute ge0 delete 172.16.123.231 Operation Succeeded Function Synopsis Commands supported only on the Brocade 7800 and the Brocade FX8-24 platforms portcfg action [slot/]ve_port options arguments Description Use this command to configure FCIP tunnels and FCIP circuits on the 1/10 GbE ports on the Brocade 7800 and FX8-24 platforms only. The FCIP tunnels on the local and remote GbE ports act as Virtual E_Ports (VE_Ports) connecting the local and remote fabrics. The following operations can be performed with this command: • portcfg fciptunnel - Create, modify, and delete Fibre Channel over IP (FCIP) tunnels. - Configure a tunnel with the FastWrite feature. - Enable or disable Tape Pipelining. - Configure the compression options. - Set the committed rate for the default circuit - Configure a tunnel for FICON emulation • portcfg fcipcircuit - Create, modify, and delete FCIP circuits. Note In the Fabric OS v6.3.0 release, you may configure up to 20 FCIP tunnels on the Brocade FX8-24 and up to 8 tunnels on the Brocade 7800. In the Fabric OS v6.3.0 release, IPv6 addresses are not supported on the Brocade 7800 and FX8-24 platforms. Operands This command has the following operands: slot For bladed systems only, specifies the slot number of the port to be configured, followed by a slash (/). ve_port Specifies the number of the VE_Port associated with the tunnel configured on one of the 1/10 GbE ports to be configured. The VE_Ports are numbered 16-23 on the Brocade 7800 and 12 - 31 on the Brocade FX8-24 blade. 580 Fabric OS Command Reference 53-1001337-01