HP AM866A Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, July 2009 - Page 350
Enables Virtual Fabrics. By default, Virtual Fabrics are disabled. Before
UPC - 884420064602
View all HP AM866A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 350 highlights
2 fosConfig vf ethsw Enables Virtual Fabrics. By default, Virtual Fabrics are disabled. Before enabling the Virtual Fabrics, ensure that there are no Administrative Domains (ADs) in effect. Administrative Domains must be disabled before enabling Virtual Fabrics. This command prompts for confirmation, because the chassis reboots after this command is executed. Enables the Ethernet switch service on the switch. The Ethernet switch service is disabled by default. Enabling the Ethernet switch service does not disrupt the FC traffic. --disable feature fcr . iSCSI iSNSC vf ethsw Disables a feature on the switch. Valid values for feature are: Disables the FC Routing service on the switch. All enabled EX_Ports and VEX_Ports on the switch must be offline for this command to succeed. To use this command to disable the FC Routing service only instead of disabling the switch, issue this command, then change the BB fabric ID using fcrConfigure. When disabling the FCR service, you may encounter the following system messages: "Please disable all EX/VEX_Ports first before running this command." This means that there were EX_Ports or VEX_Ports online when this command was issued. Take these ports offline and try the command again. "FC Routing service is already disabled" -This means that the FC Routing service is already disabled. Disables the iSCSI service on the switch. Disables the iSNSC service on the switch. Disables Virtual Fabrics on the switch. This command prompts for confirmation, because the chassis reboots after this command is executed. Disables the Ethernet switch service. Ethernet switching is disabled by default. This operation reboots the switch and is therefore disruptive. You must disable the service before downgrading from Fabric OS v6.3.0 to v6.2.0. --show Displays the current operating status of features on the switch. Examples To display the operating status of the services: switch:admin> fosconfig --show FC Routing service: iSCSI service: iSNS Client service: Virtual Fabric: Ethernet Switch Service: enabled enabled disabled enabled disabled To disable the FC Routing service: switch:admin> fosconfig --disable fcr FC Routing service is disabled 320 Fabric OS Command Reference 53-1001337-01