HP BL2x220c HP ProLiant BL2x220c Generation 5 Server Blade Maintenance and Ser - Page 28
CAUTION, IMPORTANT, Heatsink retaining screws should be tightened in diagonally opposite pairs in an
View all HP BL2x220c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
4. Remove the failed heatsink. To replace the component: 1. Clean the old thermal grease from the processor with the alcohol swab. Allow the alcohol to evaporate before continuing. 2. Remove the thermal interface protective cover from the spare heatsink. CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an "X" pattern). IMPORTANT: When installing the heatsink, align the guide pins on the processor retention bracket with the alignment holes in the heatsink. Removal and replacement procedures 28
Removal and replacement procedures
28
4.
Remove the failed heatsink.
To replace the component:
1.
Clean the old thermal grease from the processor with the alcohol swab. Allow the alcohol to
evaporate before continuing.
2.
Remove the thermal interface protective cover from the spare heatsink.
CAUTION:
Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
IMPORTANT:
When installing the heatsink, align the guide pins on the processor retention
bracket with the alignment holes in the heatsink.