HP BL2x220c HP ProLiant BL2x220c Generation 5 Server Blade Maintenance and Ser - Page 40
The processor is designed to fit one way into the socket. Use the alignment guides
![]() |
View all HP BL2x220c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
a. Open the processor retaining latch and the processor socket retaining bracket. b. Remove the processor socket protective cover. 3. Install the processor socket cover onto the processor socket of the failed system board. 4. Install the processor on the spare system board. CAUTION: The processor is designed to fit one way into the socket. Use the alignment guides on the processor and socket to properly align the processor with the socket. Refer to the server blade hood label for specific instructions. CAUTION: Always install the processor parallel to the system board to avoid damage to the pins. Removal and replacement procedures 40
![](/manual_guide/products/hewlettpackard-bl2x220c-hp-proliant-bl2x220c-generation-5-server-blade-maintenance-service-guide-bad16ef/40.png)
Removal and replacement procedures
40
a.
Open the processor retaining latch and the processor socket retaining bracket.
b.
Remove the processor socket protective cover.
3.
Install the processor socket cover onto the processor socket of the failed system board.
4.
Install the processor on the spare system board.
CAUTION:
The processor is designed to fit one way into the socket. Use the alignment guides
on the processor and socket to properly align the processor with the socket. Refer to the server
blade hood label for specific instructions.
CAUTION:
Always install the processor parallel to the system board to avoid damage to the
pins.