HP BL2x220c HP ProLiant BL2x220c Generation 5 Server Blade Maintenance and Ser - Page 30
Remove the server blade
View all HP BL2x220c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
IMPORTANT: Processor socket 1 must always be populated. If processor socket 1 is empty, the server blade does not power up. NOTE: Do not discard the processor protective cover. Always install the processor protective cover if the processor is removed from the socket. To remove the component: 1. Power down the server blade (on page 23). 2. Remove the server blade (on page 23). 3. Access the internal server components (on page 24). 4. Remove the heatsink. 5. Open the processor retaining latch and the processor socket retaining bracket. Removal and replacement procedures 30
Removal and replacement procedures
30
IMPORTANT:
Processor socket 1 must always be populated. If processor socket 1 is empty, the
server blade does not power up.
NOTE:
Do not discard the processor protective cover. Always install the processor protective
cover if the processor is removed from the socket.
To remove the component:
1.
Power down the server blade (on page
23
).
2.
Remove the server blade (on page
23
).
3.
Access the internal server components (on page
24
).
4.
Remove the heatsink.
5.
Open the processor retaining latch and the processor socket retaining bracket.