HP BL2x220c HP ProLiant BL2x220c Generation 5 Server Blade Maintenance and Ser - Page 43

Server B system board

Get HP BL2x220c - ProLiant - G5 Server A PDF manuals and user guides View all HP BL2x220c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

11. Record the server serial number and product ID. For the location of the serial number label, see "Server A system board components (on page 60)." 12. Install the server B assembly ("Install server B assembly" on page 25). 13. Install the server blade. After you replace the system board, you must re-enter the server serial number and the product ID. 1. During the server startup sequence, press the F9 key to access RBSU. 2. Select the System Options menu. 3. Select Serial Number. The following warning is displayed: WARNING! WARNING! WARNING! The serial number is loaded into the system during the manufacturing process and should NOT be modified. This option should only be used by qualified service personnel. This value should always match the serial number sticker located on the chassis. 4. Press the Enter key to clear the warning. 5. Enter the serial number and press the Enter key. 6. Select Product ID. 7. Enter the product ID and press the Enter key. 8. Press the Esc key to close the menu. 9. Press the Esc key to exit RBSU. 10. Press the F10 key to confirm exiting RBSU. The server will automatically reboot. Server B system board To remove the component: 1. Power down the server blade (on page 23). 2. Remove the server blade (on page 23). 3. Access the internal server components (on page 24). 4. Remove the server B USB key, if installed. 5. Remove the hard drive, if installed ("Hard drive" on page 25). 6. Remove all DIMMs ("DIMMs" on page 27). 7. Remove the heatsink ("Heatsink" on page 27). Removal and replacement procedures 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Removal and replacement procedures
43
11.
Record the server serial number and product ID. For the location of the serial number label, see
"Server A system board components (on page
60
)."
12.
Install the server B assembly ("
Install server B assembly
" on page
25
).
13.
Install the server blade.
After you replace the system board, you must re-enter the server serial number and the product ID.
1.
During the server startup sequence, press the
F9
key to access RBSU.
2.
Select the
System Options
menu.
3.
Select
Serial Number
. The following warning is displayed:
WARNING! WARNING! WARNING! The serial number is loaded into the system
during the manufacturing process and should NOT be modified. This option
should only be used by qualified service personnel. This value should
always match the serial number sticker located on the chassis.
4.
Press the
Enter
key to clear the warning.
5.
Enter the serial number and press the
Enter
key.
6.
Select
Product ID
.
7.
Enter the product ID and press the
Enter
key.
8.
Press the
Esc
key to close the menu.
9.
Press the
Esc
key to exit RBSU.
10.
Press the
F10
key to confirm exiting RBSU. The server will automatically reboot.
Server B system board
To remove the component:
1.
Power down the server blade (on page
23
).
2.
Remove the server blade (on page
23
).
3.
Access the internal server components (on page
24
).
4.
Remove the server B USB key, if installed.
5.
Remove the hard drive, if installed ("
Hard drive
" on page
25
).
6.
Remove all DIMMs ("
DIMMs
" on page
27
).
7.
Remove the heatsink ("
Heatsink
" on page
27
).