HP Brocade 8/12c Brocade Fabric OS Documentation Updates - Supporting Fabric O - Page 31

perfClearFilterMonitor 5 perfClearFilterMonitor Synopsis Clears counters of one or more filter-based performance monitors. perfclearfiltermonitor [slotnumber/]portnumber [monitorId] Description Use this command to clear counters for all filter-based performance monitors on a port or a filter-based monitor associated with a specific monitorId. Issuing portStatsClear on a port also results in all filter-based monitors clearing. Notes This command requires a Brocade Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: slotnumber For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be cleared, followed by a slash (/). portnumber monitorId Specifies the number of the port on which the monitor is to be cleared, relative to its slot for bladed systems. Use switchShow for a list of valid ports. Specify the monitor number to clear. Monitor numbers are defined when created and can be displayed using perfShowEEMonitor. This operand is optional. If not specified, all monitor counters on the port are cleared. Optionally, a comma can separate the operands. A space is required to separate the operands even when using commas. Examples To clear statistics counters for a filter-based monitor: switch:admin> perfclearfiltermonitor 1/2 4 Filter-based monitor number 4 counters are cleared switch:admin> perfclearfiltermonitor 1/2 This will clear ALL filter-based monitors' counters on port 2, continue? (yes, y, no, n): [no] y See Also perfMonitorClear, perfHelp Fabric OS Documentation Updates 19 53-1002063-09