HP Brocade 8/12c Brocade Fabric OS Documentation Updates - Supporting Fabric O - Page 67
Brocade DCX Backbone Hardware Reference Manual, In
![]() |
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter Brocade DCX Backbone Hardware Reference Manual 9 In this chapter The updates in this chapter are for the Brocade DCX Backbone Hardware Reference Manual, publication number 53-1000685-13, published October 2011 •Chapter 5, Removal and Replacement Procedures 55 Chapter 5, Removal and Replacement Procedures All of the following occurs under the heading "Removal and replacement of the WWN card." Under the subheading "Determining the status of a WWN card" on page 73, replace the information in Table 12 in the Sample error message column for the WWN unit is being faulted row with the following information: Type of message WWN unit is being faulted. Sample error message , [EM-1034], ,, ERROR, , WWN # set to faulty, rc= or , [EM-1003], 40, SLOT 7 | FFDC | CHASSIS, CRITICAL, Brocade_DCX, WWN 2 has unknown hardware identifier: FRU faulted Before the subheading "Removing the WWN card and WWN bezel (logo plate)" on page 74, add the following section: Preparing for the WWN card replacement If the WWN card requires replacement, complete the following steps. ATTENTION Follow ESD precautions (see "ESD Precautions" in your chassis manual). 1. Open a Telnet session to the chassis and log in to the active CP as admin. The default password is "password". 2. Verify that you are logged into the active CP. Run the haShow command to determine the active CP. Fabric OS Documentation Updates 55 53-1002063-09
![](/manual_guide/products/hewlettpackard-storefabric-sn6500b-brocade-fabric-os-documentation-updates-supporting-fabric-os-v64x-53100206309-2012-1feb673/67.png)