HP Brocade 8/12c Brocade Fabric OS Documentation Updates - Supporting Fabric O - Page 37
fwShow, Synopsis, persistence, disable, Description, fwCon Notes, Operands, Examples
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
fwShow 5 The fwShow command was deprecated in Fabric OS v6.4.0 along with fwConfigure. Typically, when Brocade announces deprecation of a command for a given Fabric OS release, the commands are still functional and only an announcement is made in the preface. The man pages are kept intact until the commands are removed in the following release. For the fwShow command, the man page was accidentally removed from the printed manual. It is reprinted below. fwShow Displays the class thresholds monitored by Fabric Watch. Synopsis fwshow [--port --persistence] | [--disable --port] Description Use this command to display the thresholds monitored by Fabric Watch. This command also displays the port persistence time and ports with all disabled thresholds. For a description of the class thresholds supported in Fabric OS and the restrictions that apply to some of the classes in terms of support for V/VE/VEX ports and GbE ports, refer to the help page for fwConfigure or consult the Fabric Watch Administrator's Guide. In Access Gateway mode, only the following class thresholds are supported. F/FL Port (Copper) class threshold is supported only on Embedded platforms. TABLE 1 Access Gateway mode classes Class Environmental SFP Port Fabric F/FL_Port (Optical) F/FL_Port (Copper) Resource Notes This command requires a Fabric Watch license. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands The operands are as follows: --port --persistence Displays the time (in seconds) that a port must be persistently in a state before being marked as such. --disable --port Displays the ports that have all associated thresholds disabled. Examples To display thresholds for a fan in the SFP class: switch:user> fwshow 1 : Show class thresholds 2 : Detail threshold information Fabric OS Documentation Updates 25 53-1002063-09