HP C8180 Basics Guide - Page 9
Connect the HP All-in-One to the network, Integrated wireless WLAN 802.11 network setup
UPC - 883585123384
View all HP C8180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Connect the HP All-in-One to the network To connect the HP All-in-One to the network, use the Ethernet port on the back of the device. To connect the HP All-in-One to the network 1. Remove the yellow plug from the back of the HP All-in-One. Network setup 2. Connect the Ethernet cable to the Ethernet port on the back of the HP All-in-One. 3. Connect the other end of the Ethernet cable to an available port on your Ethernet router, switch, or wireless router. 4. Once you have connected the HP All-in-One to the network, install the software as described in "Install the software for a network connection" on page 14. Integrated wireless WLAN 802.11 network setup For optimal performance and security in your wireless network, HP recommends you use a wireless router or access point (802.11) to connect the HP All-in-One and the other network elements. When network elements are connected through a wireless router or access point, this is called an infrastructure network. Integrated wireless WLAN 802.11 network setup 7