HP Chromebook x2 Maintenance and Service Guide - Page 26
Display panel assembly, IMPORTANT, CAUTION
View all HP Chromebook x2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Display panel assembly NOTE: The display panel spare part kit includes the touchscreen control board, but does not include the touchscreen control board cable or display cable. Description Display panel, 12.3 in BrightView Ultra Wide Aspect Ratio, WLED (2400 × 1600) ultraslim, eDP 1.3 + PSR Display cable Touchscreen control board cable Spare part number L17082-001 L17069-001 L17068-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the display panel, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the display panel: 1. Insert a case insertion tool between the base enclosure and the slate screen(1). 2. Lift the display panel up and to the rear(2). CAUTION: Use care when rotating the display panel to avoid damaging the touch panel control board and display panel cables. 3. Release the touchscreen control board cable (1) from the zero-insertion force connector attached to the base enclosure. 4. Remove the adhesive cover (2) from the display panel cable (3). 5. Release the display panel cable from the ZIF connector on the base enclosure (4). 20 Chapter 5 Removal and replacement procedures for authorized service provider parts