HP Chromebook x2 Maintenance and Service Guide - Page 42

Rear microphone module, Battery see

Get HP Chromebook x2 PDF manuals and user guides View all HP Chromebook x2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Rear microphone module Description Rear microphone module Spare part number xxxxxx-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the rear microphone module, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel assembly on page 20), and then remove the following component: ▲ Battery (see Battery on page 24). Remove the rear microphone module: 1. Release the microphone cable from the ZIF connector on the system board (1). 2. Remove the rear microphone module from the base enclosure (2). Reverse this procedure to install the rear microphone module. 36 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
Rear microphone module
Description
Spare part number
Rear microphone module
xxxxxx-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the rear microphone module, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the display panel (see
Display panel assembly
on page
20
), and then remove the following
component:
▲
Battery (see
Battery
on page
24
).
Remove the rear microphone module:
1.
Release the microphone cable from the ZIF connector on the system board
(1)
.
2.
Remove the rear microphone module from the base enclosure
(2)
.
Reverse this procedure to install the rear microphone module.
36
Chapter 5
Removal and replacement procedures for authorized service provider parts