HP Chromebook x2 Maintenance and Service Guide - Page 41

WLAN antenna

Get HP Chromebook x2 PDF manuals and user guides View all HP Chromebook x2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

WLAN antenna Description WLAN dual antenna module Spare part number L17064-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the WLAN antenna module, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel assembly on page 20), and then remove the following components: ▲ Battery (see Battery on page 24). Remove the WLAN antenna module: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. 2. Remove the four Phillips M2.0 × 3.0 screw (2) that secure the antennas to the base enclosure. 3. Remove the antennas from the base enclosure (3). Reverse this procedure to install the WLAN antenna module. Component replacement procedures 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
WLAN antenna
Description
Spare part number
WLAN dual antenna module
L17064-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the WLAN antenna module, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the display panel (see
Display panel assembly
on page
20
), and then remove the following
components:
▲
Battery (see
Battery
on page
24
).
Remove the WLAN antenna module:
1.
Disconnect the WLAN antenna cables
(1)
from the terminals on the WLAN module.
2.
Remove the four Phillips M2.0 × 3.0 screw
(2)
that secure the antennas to the base enclosure.
3.
Remove the antennas from the base enclosure
(3)
.
Reverse this procedure to install the WLAN antenna module.
Component replacement procedures
35