HP Chromebook x360 14 G1 Maintenance and Service Guide - Page 38

I/O board, Remove the Phillips M2.0 × 4.0 screw

Get HP Chromebook x360 14 G1 PDF manuals and user guides View all HP Chromebook x360 14 G1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

I/O board Table 5-8 I/O board and cable descriptions and part numbers Description I/O board I/O cable, 30P I/O cable, 40P Spare part number L36895-001 L36892-001 L36893-001 NOTE: I/O board bottom protective tape is included in the Miscellaneous Parts Kit, spare part number L50831-001. Before removing the I/O board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 20). 2. Remove the bottom cover (see Computer feet and bottom cover on page 20). 3. Remove the battery (see Battery on page 22). Remove the I/O board: 1. Disconnect the cable from the ZIF connector on the I/O board (1). 2. Remove the two Phillips M2.0 × 3.0 screws (2) that secure the I/O board to the computer. 3. Remove the Phillips M2.0 × 4.0 screw (3) from the USB bracket. 4. Lift the I/O board (4). 5. Rotate the board upside down (1). 32 Chapter 5 Removal and replacement procedures for authorized service providers

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
I/O board
Table 5-8
I/O board and cable descriptions and part numbers
Description
Spare part number
I/O board
L36895-001
I/O cable, 30P
L36892-001
I/O cable, 40P
L36893-001
NOTE:
I/O board bottom protective tape is included in the Miscellaneous Parts Kit, spare part number
L50831-001.
Before removing the I/O board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
20
).
2.
Remove the bottom cover (see
Computer feet and bottom cover
on page
20
).
3.
Remove the battery (see
Battery
on page
22
).
Remove the I/O board:
1.
Disconnect the cable from the ZIF connector on the I/O board
(1)
.
2.
Remove the two Phillips M2.0 × 3.0 screws
(2)
that secure the I/O board to the computer.
3.
Remove the Phillips M2.0 × 4.0 screw
(3)
from the USB bracket.
4.
Lift the I/O board
(4)
.
5.
Rotate the board upside down
(1)
.
32
Chapter 5
Removal and replacement procedures for authorized service providers