HP Chromebook x360 14 G1 Maintenance and Service Guide - Page 45

USB bracket, system board, Remove the USB bracket from the system board

Get HP Chromebook x360 14 G1 PDF manuals and user guides View all HP Chromebook x360 14 G1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

USB bracket, system board Table 5-12 USB bracket description and part number Description USB bracket Spare part number L36909-001 Before removing the USB bracket from the system board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 20). 2. Remove the bottom cover (see Computer feet and bottom cover on page 20). 3. Remove the battery (see Battery on page 22). 4. Remove the fan (see Fan on page 25). 5. Remove the system board (see System board on page 36). Remove the USB bracket from the system board: 1. Remove the Phillips M2.0 × 4.0 screw (1) that secures the USB bracket to the system board. 2. Remove the bracket from the system board (2). Reverse this procedure to install the USB bracket onto the system board. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
USB bracket, system board
Table 5-12
USB bracket description and part number
Description
Spare part number
USB bracket
L36909-001
Before removing the USB bracket from the system board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
20
).
2.
Remove the bottom cover (see
Computer feet and bottom cover
on page
20
).
3.
Remove the battery (see
Battery
on page
22
).
4.
Remove the fan (see
Fan
on page
25
).
5.
Remove the system board (see
System board
on page
36
).
Remove the USB bracket from the system board:
1.
Remove the Phillips M2.0 × 4.0 screw
(1)
that secures the USB bracket to the system board.
2.
Remove the bracket from the system board
(2)
.
Reverse this procedure to install the USB bracket onto the system board.
Component replacement procedures
39