HP Chromebook x360 14 G1 Maintenance and Service Guide - Page 43
Remove the Phillips M2.0 × 4.0 screw
View all HP Chromebook x360 14 G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2. Remove the Phillips M2.0 × 3.0 screw (1) that secures the system board to the computer. 3. Remove the Phillips M2.0 × 4.0 screw (2) from the USB bracket. 4. Lift the side up the system board (3), and then pull the system board away from the computer (4). TIP: A cable connects to the bottom of the system board. Make sure not to accidentally disconnect the cable when removing the system board. Component replacement procedures 37
2.
Remove the Phillips M2.0 × 3.0 screw
(1)
that secures the system board to the computer.
3.
Remove the Phillips M2.0 × 4.0 screw
(2)
from the USB bracket.
4.
Lift the side up the system board
(3)
, and then pull the system board away from the computer
(4)
.
TIP:
A cable connects to the bottom of the system board. Make sure not to accidentally disconnect the
cable when removing the system board.
Component replacement procedures
37