HP Color LaserJet CP2025 HP Color LaserJet CP2020 Series - Software Technical - Page 100

IPv6 Configuration, Network Identification

Page 100 highlights

IPv6 Configuration The IPv6 Configuration screen shows the status of the IPv6 Network configuration settings. This screen is read-only and no settings can be modified here. Up to seven IPv6 addresses can be shown on this screen, depending upon the automatic configuration of the networking firmware. All available IPv6 addresses are shown. Figure 2-37 HP ToolboxFX IPv6 Configuration screen Software Description Network Identification Use the Network Identification screen to configure the host name and domain name(s) used to identify the product on the network. The values for host name and domain names are retrieved from the firmware and displayed on this screen. The networking firmware determines the host name and domain name(s) to use. This information cannot be modified. The text entries are disabled under certain circumstances. The following table defines when the entities are disabled: Table 2-9 Network Identification screen - Text entries Text entry Disabled status Host name Disabled if configured by BOOTP Domain name (IPv4/IPv6) Disabled if configured by BOOTP, DHCPv4, or DHCPv6 80 Chapter 2 Software description ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300

IPv6 Configuration
The
IPv6 Configuration
screen shows the status of the IPv6 Network configuration settings. This screen
is read-only and no settings can be modified here.
Up to seven IPv6 addresses can be shown on this screen, depending upon the automatic configuration
of the networking firmware. All available IPv6 addresses are shown.
Figure 2-37
HP ToolboxFX
IPv6 Configuration
screen
Network Identification
Use the
Network Identification
screen to configure the host name and domain name(s) used to identify
the product on the network.
The values for host name and domain names are retrieved from the firmware and displayed on this
screen. The networking firmware determines the host name and domain name(s) to use. This
information cannot be modified.
The text entries are disabled under certain circumstances. The following table defines when the entities
are disabled:
Table 2-9
Network Identification screen – Text entries
Text entry
Disabled status
Host name
Disabled if configured by BOOTP
Domain name (IPv4/IPv6)
Disabled if configured by BOOTP, DHCPv4, or DHCPv6
80
Chapter 2
Software description
ENWW
Software Description